Ivium Technologies: Electrochemical Research Solutions.

<body bgcolor="#FFFFFF"> Ivium Technologies provides electrochemical instrumentation for general, portable and impedance applications. CompactStat: High sensitivity portable potentiostat/galvanostat with impedance analyser. IviumStat: High power potentiostat/galvanostat with impedance analyser. Ivium Technologies: email: info@ivium.nl De Regent 178 5611 HW Eindhoven The Netherlands Tel. +31 40 2555636 Fax.+31 40 2555732 IVIUMSTAT Electrochemical Interface & Impedance Analyser Key features: • Wide application range: The instrument is well suited for applications requiring a wide dynamic range, such as Battery-testing, Corrosion-measurements and Electrochemical Research applications. • Complete solution: The IviumStat offers a complete package. The hardware includes a build-in high-performance Frequency Response Analyser, and all the standard Electrochemical techniques. All measurement and dataprocessing software is included, for Windows based pc’s. • Safety: The compliance (maximum current or potential) of the instrument can be defined by the operator. Thus valuable samples may be protected, and unsafe situations prevented. • Automation: Multiple analog and digital input & output ports are available, that can monitor & control peripheral equipment. The included software integrates this functionality. • Multiple Channel option: Up to 64 IviumStats may be controlled with a single PC via USB. • Expandibility: optional Bipotentiostat-, True Linear Scan- and Coulometer-modules are available. Techniques: • General: - Automatic current range selection: 1pA to 10A, and voltage range 1mV to 10V. - Automatic variable noise filter and potentiostat/galvanostat stability settings - Simultaneous acquisition of current/potential and up to 8 peripheral analog signals - Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory. • Sweep methods: Linear Sweep and Cyclic Voltammetry: - Applicable scanrates: 1µV/s to 10,000 V/s - Standard scanrange ± 10V, with 0.3mV step resolution. - High definition scanrange ± 100mV, with 3µV step resolution. • Pulse methods: multiple potentiostatic/galvanostatic pulses - Up to 255 potential or current levels may be defined - Minimum pulse duration 50µs, definable with 0.125µs resolution. - Minimum sampling interval: 10µs • Electrochemical Impedance Spectroscopy - Up to 255 frequencies may be applied during a single scan in the 10µHz to 1MHz range. - Result optimalisation by automated tuned filters, gain amplifiers and dc-subtraction. COMPACTSTAT : Portable Electrochemical Interface & Impedance Analyser Key features: • Portability: small footprint (< 600 gram) and low power consumption. The instrument can be operated via the USB port from a pc, without additional power supply. In combination with a laptop-computer, the Ivium CompactStat provides a truly mobile electrochemical measurement station for corrosion and analytical applications. • Low noise and galvanic isolation: The instrument is electrically isolated from power lines and PC. It has a superior noise immunity, and is capable to determine very small signals, such as is required in nano-technology applications. Also, the instrument may be applied in situations where the sample must be disconnected from a common ground (floating). • Complete solution: The CompactStat offers a complete package. The hardware includes a build-in high-performance Frequency Response Analyser, and all the standard Electrochemical techniques. All measurement and dataprocessing software is included, for Windows based PC’s. • Automation: Multiple analog and digital input & output ports are available, that can monitor & control peripheral equipment. The included software integrates this functionality. • Multiple Channel option: Up to 64 CompactStats may be controlled with a single PC via USB. • Expandibility: optional Bipotentiostat-, True Linear Scan- and Coulometer-modules are available. Standard CompactStat case included. Techniques: • General: - Automatic current range selection: 1pA to 10mA, and voltage range 0.4mV to 4V. - Automatic variable noise filter and potentiostat/galvanostat stability settings - Simultaneous acquisition of current/potential and up to 8 peripheral analog signals - Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory. • Sweep methods: Linear Sweep and Cyclic Voltammetry: - Applicable scanrates: 1µV/s to 10,000 V/s - Standard scanrange ± 4V, with 0.125mV step resolution. - High definition scanrange ± 100mV, with 3µV step resolution. • Pulse methods: multiple potentiostatic/galvanostatic pulses - Up to 255 potential or current levels may be defined - Minimum pulse duration 50µs, definable with 0.125µs resolution. - Minimum sampling interval: 10µs • Electrochemical Impedance Spectroscopy - Up to 255 frequencies may be applied during a single scan in the 10µHz to 1MHz range. - Result optimalisation by automated tuned filters, gain amplifiers and dc-subtraction. PalmSensPC is the PC version of the PalmSens instrument: The instrument(s) can be controlled via the USB port(s) of any PC that has Windows 98SE, 2000 or XP installed. PalmSensPC is a compact all-round potentiotat/galvanostat that is affordable and will fit on any lab-table (155*85*35mm). It is capable of performing all conventional electrochemical techniques: Normal pulse voltammetry Differential pulse voltammetry (with pulse time 1 ms – 300 ms) Square wave voltammetry (with frequency 1 Hz – 400 Hz) Ac-Voltammetry (with frequency 28 Hz – 90 Hz) Chronopotentiometric stripping or PSA (sampling rate is 40 kHz) Amperometric detection Pulsed amperometric detection (with pulse time 1 ms – 1 s) Linear sweep and cyclic voltammetry with scan rates from 1 mV/s to 10 V/s Battery cycling Available options: CH8 multiplexer: to work with 8 different cells or working electrodes USB-ISO : creates a galvanic isolation between PC and PalmSensPC Details: For the application note USB-ISO, look at Applications / notes. Prices: PalmSens instrument, electrode cables, USB cable, Manual and PC software: EUR 3400,- PalmSens instrument, electrode cables, USB-ISO interface, Manual and PC software: EUR 3500,- Aluminium case: EUR 120,- CH8 multiplexer: EUR 1200,- Please contact Ivium Technologies for quotations or additional information. </body>